Menu
  • Components
    • Adaptors
      • 1 mm Adaptors
      • 1.85 mm Adaptors
      • 2.4 mm Adaptors
      • 2.92 mm Adaptors
      • 3.5 mm Adaptors
      • N Adaptors
      • BNC Adaptors
      • SSMA Adaptors
      • SMA Adaptors
      • TNC Adaptors
      • TNCA Adaptors
    • Amplifier Modules
      • Broadband Driving Amplifiers
      • Broadband Power Amplifiers
      • Waveguide Amplifiers
      • Low Noise Amplifiers
    • Antennas
      • Cassegrain Antennas
      • Circular Gain Horn Antennas
      • Corrugated Horn Antennas
      • GPS Antennas
      • Horn Lens Antennas
      • Microstrip Patch Antenna for Speed Sensor Heads
      • Microstrip Patch Array Antennas
      • Omni Directional Antennas
      • Orthomode Transducers
      • Circular Polarizers
      • Linear-Circular Switchable Polarizers
    • Antenna Test Accessories
      • Antenna Test Cables
      • Antenna Test Components
      • Antenna Test Kits
      • Coaxial Loads
      • RF Attenuators
      • Low PIM RF Loads
      • Open Short Loads
      • RF Load/Termination
    • Bias Tees
    • Coaxial Adaptors
      • 1.0 mm Coaxial Adaptors
      • 1.85 mm Coaxial Adaptors
      • 2.4 mm Coaxial Adaptors
      • 2.9 mm Coaxial Adaptors
      • 2.92 mm Coaxial Adaptors
      • 3.5 mm Coaxial Adaptors
      • 7 mm Coaxial Adaptors
      • 7/16 Coaxial Adaptors
      • L 16 Coaxial Adaptors
      • SMA Coaxial Adaptors
      • SMP Coaxial Adaptors
      • SSMA Coaxial Adaptors
      • SSMP Coaxial Adaptors
      • Type-N Coaxial Adaptors
      • 4.3-10 Coaxial Adaptors
      • NEX10 Coaxial Adaptors
    • Coaxial Fixed Attenuators
      • 1.85 mm Coaxial Fixed Attenuators
      • 2.4 mm Coaxial Fixed Attenuators
      • 2.92 mm Coaxial Fixed Attenuators
      • 3.5 mm Coaxial Fixed Attenuators
      • Type-N Coaxial Fixed Attenuators
    • Coaxial Loads
      • 1.85 mm Coaxial Loads
      • 2.4 mm Coaxial Loads
      • 2.92 mm Coaxial Loads
      • 3.5 mm Coaxial Loads
      • 7 mm Coaxial Loads
      • Low PIM RF Loads
      • Type-N Coaxial Loads
    • Coaxial Mechanical Calibration Kits
      • DC - 9 GHz Coaxial Mechanical Calibration Kits
      • > 9 - 26.5 GHz Coaxial Mechanical Calibration Kits
      • > 26.5 - 40 GHz Coaxial Mechanical Calibration Kits
      • > 40 GHz Coaxial Mechanical Calibration Kits
    • DC Blocks
      • 2.4 mm DC Blocks
      • Type-N DC Blocks
      • SMA DC Blocks
      • BNC DC Blocks
      • TNC DC Blocks
      • 2.9K DC Blocks
      • 2.4K DC Blocks
      • SMP DC Blocks
      • Type-F DC Blocks
      • 7/16 DC Blocks
      • GPO DC Blocks
    • Detectors
      • Coaxial Detectors
      • Waveguide Detectors
    • Electromechanical Switches
      • SPDT & DPDT Switches
      • Compact SPDT Switches (Unterminated)
      • SPDT Switches (Terminated)
      • Bypass Switches & 2P3T Switches
      • SP4T Switches (Terminated)
      • SP6T Switches (Terminated)
      • Switches Selection Guide
    • Hybrids
      • 3 dB 90 Degree Hybrid
      • 3 dB 180 Degree Hybrid
    • Mixers
      • Microwave Broadband Double Balance Mixers
      • Millimeter-Wave Balance Mixer
      • Millimeter-Wave Harmonic Mixers
    • Rotary Joints
    • RF Coaxial Connectors
      • 1mm Precision Coaxial Connectors
      • 1.85mm Precision Coaxial Connectors
      • 2.4mm Precision Coaxial Connectors
      • 2.92mm Precision Coaxial Connectors
      • BMA Coaxial Connectors
      • BNC Coaxial Connectors
      • D4 Coaxial Connectors
      • DS Coaxial Connectors
      • DSB Coaxial Connectors
      • DSA Coaxial Connectors
      • L9 Coaxial Connectors
      • MCX Coaxial Connectors
      • SAA Coaxial Connectors
      • SMB Coaxial Connectors
      • SMC Coaxial Connectors
      • TNC Coaxial Connectors
      • SSMB Coaxial Connectors
      • SMA Coaxial Connectors
      • Surface Mount Coaxial Connectors
      • DSD Coaxial Connectors
      • J.CC11 Coaxial Connectors
      • J.STWX8 Coaxial Connectors
    • PIM Accessories
      • Standard PIM Connectors
      • Torque Wrenches
    • Power Dividers
      • 1.85 mm Power Dividers
      • 2.4 mm Power Dividers
      • 2.92 mm Power Dividers
      • 3.5 mm (f) Power Dividers
      • SMA Power Dividers
    • Programmable Step Attenuators
      • 2.4 mm Programmable Step Attenuators
      • 3.5 mm Programmable Step Attenuators
    • Waveguide Mechanical Calibration Kits
      • 2.6 - 18 GHz Waveguide Mechanical Calibration Kits
      • > 18 - 40 GHz Waveguide Mechanical Calibration Kits
      • > 40 - 75 GHz Waveguide Mechanical Calibration Kits
      • > 75 GHz Waveguide Mechanical Calibration Kits
    • Waveguide to Coaxial Adaptors
      • 1.85mm Waveguide to Coaxial Adaptors
      • 2.4mm Waveguide to Coaxial Adaptors
      • 2.92mm Waveguide to Coaxial Adaptors
      • 3.5mm Waveguide to Coaxial Adaptors
      • APC-7 Waveguide to Coaxial Adaptors
      • Type-N Waveguide to Coaxial Adaptors
    • YIG Bandpass Filters
    • YIG Tuned Oscillators
  • Cables
    • Antenna Test Cables
    • RF Bulk Cables
      • Flexible Bulk Cables
      • Ultra Low Loss Phase Stable Flexible Cables
      • Ultra Flexible Bulk Cables
      • Low Loss Phase Stable Cables
    • RF Cable Assemblies
      • RG Flexible Cable Assemblies
      • Low Loss Flexible Cable Assemblies
      • Semi-flexible Cable Assemblies
      • Semi-rigid Cable Assemblies
      • Flexible Cable Assemblies
      • Low Loss Phase Stable Cable Assemblies
      • Ultra Low Loss Phase Stable Flexible Cable Assemblies
      • mmWave Flexible Cable Assemblies
      • Ultra-flexible Test Cable Assemblies
      • High Performance Phase Cable Assemblies
      • VNA High Performance Test Phase Stable Cables
  • About Us
  • Contact Us
  • Hello. Sign in | Register
MCS Components
    Helpline: +44 (0) 1492 643 060
    • Shopping Cart 0
      Your Cart
    Menu
    MCS Components
    MCS Components
    0
    • Components
      • Adaptors
        • 1 mm Adaptors
        • 1.85 mm Adaptors
        • 2.4 mm Adaptors
        • 2.92 mm Adaptors
        • 3.5 mm Adaptors
        • N Adaptors
        • BNC Adaptors
        • SSMA Adaptors
        • SMA Adaptors
        • TNC Adaptors
        • TNCA Adaptors
      • Amplifier Modules
        • Broadband Driving Amplifiers
        • Broadband Power Amplifiers
        • Waveguide Amplifiers
        • Low Noise Amplifiers
      • Antennas
        • Cassegrain Antennas
        • Circular Gain Horn Antennas
        • Corrugated Horn Antennas
        • GPS Antennas
        • Horn Lens Antennas
        • Microstrip Patch Antenna for Speed Sensor Heads
        • Microstrip Patch Array Antennas
        • Omni Directional Antennas
        • Orthomode Transducers
        • Circular Polarizers
        • Linear-Circular Switchable Polarizers
      • Antenna Test Accessories
        • Antenna Test Cables
        • Antenna Test Components
        • Antenna Test Kits
        • Coaxial Loads
        • RF Attenuators
        • Low PIM RF Loads
        • Open Short Loads
        • RF Load/Termination
      • Bias Tees
      • Coaxial Adaptors
        • 1.0 mm Coaxial Adaptors
        • 1.85 mm Coaxial Adaptors
        • 2.4 mm Coaxial Adaptors
        • 2.9 mm Coaxial Adaptors
        • 2.92 mm Coaxial Adaptors
        • 3.5 mm Coaxial Adaptors
        • 7 mm Coaxial Adaptors
        • 7/16 Coaxial Adaptors
        • L 16 Coaxial Adaptors
        • SMA Coaxial Adaptors
        • SMP Coaxial Adaptors
        • SSMA Coaxial Adaptors
        • SSMP Coaxial Adaptors
        • Type-N Coaxial Adaptors
        • 4.3-10 Coaxial Adaptors
        • NEX10 Coaxial Adaptors
      • Coaxial Fixed Attenuators
        • 1.85 mm Coaxial Fixed Attenuators
        • 2.4 mm Coaxial Fixed Attenuators
        • 2.92 mm Coaxial Fixed Attenuators
        • 3.5 mm Coaxial Fixed Attenuators
        • Type-N Coaxial Fixed Attenuators
      • Coaxial Loads
        • 1.85 mm Coaxial Loads
        • 2.4 mm Coaxial Loads
        • 2.92 mm Coaxial Loads
        • 3.5 mm Coaxial Loads
        • 7 mm Coaxial Loads
        • Low PIM RF Loads
        • Type-N Coaxial Loads
      • Coaxial Mechanical Calibration Kits
        • DC - 9 GHz Coaxial Mechanical Calibration Kits
        • > 9 - 26.5 GHz Coaxial Mechanical Calibration Kits
        • > 26.5 - 40 GHz Coaxial Mechanical Calibration Kits
        • > 40 GHz Coaxial Mechanical Calibration Kits
      • DC Blocks
        • 2.4 mm DC Blocks
        • Type-N DC Blocks
        • SMA DC Blocks
        • BNC DC Blocks
        • TNC DC Blocks
        • 2.9K DC Blocks
        • 2.4K DC Blocks
        • SMP DC Blocks
        • Type-F DC Blocks
        • 7/16 DC Blocks
        • GPO DC Blocks
      • Detectors
        • Coaxial Detectors
        • Waveguide Detectors
      • Electromechanical Switches
        • SPDT & DPDT Switches
        • Compact SPDT Switches (Unterminated)
        • SPDT Switches (Terminated)
        • Bypass Switches & 2P3T Switches
        • SP4T Switches (Terminated)
        • SP6T Switches (Terminated)
        • Switches Selection Guide
      • Hybrids
        • 3 dB 90 Degree Hybrid
        • 3 dB 180 Degree Hybrid
      • Mixers
        • Microwave Broadband Double Balance Mixers
        • Millimeter-Wave Balance Mixer
        • Millimeter-Wave Harmonic Mixers
      • Rotary Joints
      • RF Coaxial Connectors
        • 1mm Precision Coaxial Connectors
        • 1.85mm Precision Coaxial Connectors
        • 2.4mm Precision Coaxial Connectors
        • 2.92mm Precision Coaxial Connectors
        • BMA Coaxial Connectors
        • BNC Coaxial Connectors
        • D4 Coaxial Connectors
        • DS Coaxial Connectors
        • DSB Coaxial Connectors
        • DSA Coaxial Connectors
        • L9 Coaxial Connectors
        • MCX Coaxial Connectors
        • SAA Coaxial Connectors
        • SMB Coaxial Connectors
        • SMC Coaxial Connectors
        • TNC Coaxial Connectors
        • SSMB Coaxial Connectors
        • SMA Coaxial Connectors
        • Surface Mount Coaxial Connectors
        • DSD Coaxial Connectors
        • J.CC11 Coaxial Connectors
        • J.STWX8 Coaxial Connectors
      • PIM Accessories
        • Standard PIM Connectors
        • Torque Wrenches
      • Power Dividers
        • 1.85 mm Power Dividers
        • 2.4 mm Power Dividers
        • 2.92 mm Power Dividers
        • 3.5 mm (f) Power Dividers
        • SMA Power Dividers
      • Programmable Step Attenuators
        • 2.4 mm Programmable Step Attenuators
        • 3.5 mm Programmable Step Attenuators
      • Waveguide Mechanical Calibration Kits
        • 2.6 - 18 GHz Waveguide Mechanical Calibration Kits
        • > 18 - 40 GHz Waveguide Mechanical Calibration Kits
        • > 40 - 75 GHz Waveguide Mechanical Calibration Kits
        • > 75 GHz Waveguide Mechanical Calibration Kits
      • Waveguide to Coaxial Adaptors
        • 1.85mm Waveguide to Coaxial Adaptors
        • 2.4mm Waveguide to Coaxial Adaptors
        • 2.92mm Waveguide to Coaxial Adaptors
        • 3.5mm Waveguide to Coaxial Adaptors
        • APC-7 Waveguide to Coaxial Adaptors
        • Type-N Waveguide to Coaxial Adaptors
      • YIG Bandpass Filters
      • YIG Tuned Oscillators
    • Cables
      • Antenna Test Cables
      • RF Bulk Cables
        • Flexible Bulk Cables
        • Ultra Low Loss Phase Stable Flexible Cables
        • Ultra Flexible Bulk Cables
        • Low Loss Phase Stable Cables
      • RF Cable Assemblies
        • RG Flexible Cable Assemblies
        • Low Loss Flexible Cable Assemblies
        • Semi-flexible Cable Assemblies
        • Semi-rigid Cable Assemblies
        • Flexible Cable Assemblies
        • Low Loss Phase Stable Cable Assemblies
        • Ultra Low Loss Phase Stable Flexible Cable Assemblies
        • mmWave Flexible Cable Assemblies
        • Ultra-flexible Test Cable Assemblies
        • High Performance Phase Cable Assemblies
        • VNA High Performance Test Phase Stable Cables
    • About Us
    • Contact Us
    • MCS ComponentsHome
    • VNA High Performance Test Phase Stable Cables
    • VNA High Performance Test Phase Stable Cables

    VNA High Performance Test Phase Stable Cables


    Instrument port Cable port 1 Cable port 2 Frequency (GHz) Insertion loss
    Type N female Type N (m) Type N (m) 18 <1.5dB View product
    Type N female Type N (m) Type N (f) 18 <1.5dB View product
    Type N female Type N (m) NMD3.5mm (m) 18 <1.5dB View product
    Type N female Type N (m) 3.5mm (f) 18 <1.5dB View product
    NMD3.5mm male NMD3.5mm (f)
    NMD3.5mm (m) 26.5 <1.8dB View product
    NMD3.5mm male NMD3.5mm (f)
    3.5mm (f) 26.5 <1.8dB View product
    NMD3.5mm male NMD3.5mm (f)
    Type N (m) 18 <1.5dB View product
    NMD3.5mm male NMD3.5mm (f)
    Type N (f) 18 <1.5dB View product
    NMD2.92mm male NMD2.92mm (f)
    NMD2.92mm (m) 40 <2.8dB View product
    MD2.92mm male NMD2.92mm (f)
    2.92mm (f) 40 <2.8dB View product
    MD2.92mm male NMD2.92mm (f)
    NMD2.4mm (m) 40 <2.8dB View product
    MD2.92mm male NMD2.92mm (f)
    2.4mm (f) 40 <2.8dB View product
    NMD2.4mm male NMD2.4mm (f) NMD2.4mm (m) 50 <3.2dB View product
    NMD2.4mm male NMD2.4mm (f) 2.4mm (f) 50 <3.2dB View product
    NMD2.4mm male NMD2.4mm (f) NMD2.92mm (m) 40 <2.8dB View product
    NMD2.4mm male NMD2.4mm (f) 2.92mm (f) 40 <2.8dB View product
    NMD1.85mm male NMD1.85mm (f)
    NMD1.85mm (m) 67 <5.8dB View product
    NMD1.85mm male NMD1.85mm (f)
    1.85mm (f) 67 <5.8dB View product

    Can't find what you are looking for or have a specific requirement? Please use the Contact Us form and we will help you however we can.

    Featured
    17 Piece Coaxial Adaptor Kit
    17 Piece Coaxial Adaptor Kit
    £0.00
    6 GHz 1.5m 7/16 DIN Male N Male Ultra Flexible Armoured Phase Stable Cable
    6 GHz 1.5m 7/16 DIN Male N Male Ultra Flexible Armoured Phase Stable Cable
    £350.00
    Type-N, DC - 9 GHz, T-Calibration Kit
    Type-N Male, DC - 9 GHz, OSL T-Calibration Kit
    £403.00
    6 GHz 1.5m 7/16 DIN Female N Male Flexible Reinforced Grip Ultra Flexible Phase Stable Cable
    6 GHz 1.5m DIN Female N Male Flexible Reinforced Grip Ultra Flexible Armoured Phase Stable Cable
    £430.00
    Type-N (m) Coaxial Load, DC - 18 GHz
    Type-N (m) Coaxial Load, DC - 18 GHz
    £226.39
    50 GHz Test Cable
    50 GHz Test Cable
    £0.00
    67 GHz Test Cable
    67 GHz Test Cable
    £0.00
    26.5 GHz Ultra Low Loss Phase & Amplitude Stable Test Cable
    26.5 GHz Ultra Low Loss Phase & Amplitude Stable Test Cable
    £0.00
    All 18 results
    18 GHz Type N Male - 3.5mm Female VNA High Performance Phase Stable Cable
    Code: TMWTypeNfemale-4
    18 GHz Type N Male - 3.5mm Female VNA High Performance Phase Stable Cable
    £0.00

    Connector material and surface treatment
    Housing: Passivation of stainless steel
    Central Conductor: Heat treatment gold plating of beryllium bronze

    Cable material and structural characteristics
    Central conductor: Silver plating on copper
    Insulator:   
    Outer conductor: Silver plated copper tape wrapping
    Outer shield: Copper wire silver plated braid
    Outer sheath: Multilayer shielding sheath
    Minimum bending radius: 50mm

    Environmental adaptability
    Continuous service temperature: 0℃~+40℃
    Storage temperature: -40℃~+75℃

    Typical parameters
    Instrument port: Type N female
    Cable port 1: Type N male
    Cable port 2: 3.5mm female
    Frequency (GHz): 18
    Standing wave (Max): 1.20:1
    Insertion loss: <1.5dB
    Amplitude stability: <±0.05dB 
    Phase stability: <±2.0°


    67 GHz NMD 1.85mm Female - 1.85mm Female VNA High Performance Phase Stable Cable
    Code: TMWNMD1.85mmmale-2
    67 GHz NMD 1.85mm Female - 1.85mm Female VNA High Performance Phase Stable Cable
    £0.00

    Connector material and surface treatment
    Housing: Passivation of stainless steel
    Central Conductor: Heat treatment gold plating of beryllium bronze

    Cable material and structural characteristics
    Central conductor: Silver plating on copper
    Insulator:   
    Outer conductor: Silver plated copper tape wrapping
    Outer shield: Copper wire silver plated braid
    Outer sheath: Multilayer shielding sheath
    Minimum bending radius: 50mm

    Environmental adaptability
    Continuous service temperature: 0℃~+40℃
    Storage temperature: -40℃~+75℃

    Typical parameters
    Instrument port: NMD1.85mm male
    Cable port 1: NMD1.85mm female
    Cable port 2: 1.85mm female
    Frequency (GHz): 67
    Standing wave (Max): 1.50:1
    Insertion loss: <5.8dB
    Amplitude stability: <±0.05dB
    Phase stability: <±6.5°


    67 GHz NMD 1.85mm Female - NMD1.85mm Male VNA High Performance Phase Stable Cable
    Code: TMWNMD1.85mmmale-1
    67 GHz NMD 1.85mm Female - NMD1.85mm Male VNA High Performance Phase Stable Cable
    £0.00

    Connector material and surface treatment
    Housing: Passivation of stainless steel
    Central Conductor: Heat treatment gold plating of beryllium bronze

    Cable material and structural characteristics
    Central conductor: Silver plating on copper
    Insulator:   
    Outer conductor: Silver plated copper tape wrapping
    Outer shield: Copper wire silver plated braid
    Outer sheath: Multilayer shielding sheath
    Minimum bending radius: 50mm

    Environmental adaptability
    Continuous service temperature: 0℃~+40℃
    Storage temperature: -40℃~+75℃

    Typical parameters
    Instrument port: NMD1.85mm male
    Cable port 1: NMD1.85mm female
    Cable port 2: NMD1.85mm male
    Frequency (GHz): 67
    Standing wave (Max): 1.50:1
    Insertion loss: <5.8dB
    Amplitude stability: <±0.05dB
    Phase stability: <±6.5°


    40 GHz NMD 2.4mm Female - 2.92mm Female VNA High Performance Phase Stable Cable
    Code: TMWNMD2.4mmmale-4
    40 GHz NMD 2.4mm Female - 2.92mm Female VNA High Performance Phase Stable Cable
    £0.00

    Connector material and surface treatment
    Housing: Passivation of stainless steel
    Central Conductor: Heat treatment gold plating of beryllium bronze

    Cable material and structural characteristics
    Central conductor: Silver plating on copper
    Insulator:   
    Outer conductor: Silver plated copper tape wrapping
    Outer shield: Copper wire silver plated braid
    Outer sheath: Multilayer shielding sheath
    Minimum bending radius: 50mm

    Environmental adaptability
    Continuous service temperature: 0℃~+40℃
    Storage temperature: -40℃~+75℃

    Typical parameters
    Instrument port: NMD2.4mm male
    Cable port 1: NMD2.4mm female
    Cable port 2: 2.92mm female
    Frequency (GHz): 40
    Standing wave (Max): 1.30:1
    Insertion loss: <2.8dB
    Amplitude stability: <±0.05dB
    Phase stability: <±3.0°


    40 GHz NMD 2.4mm Female - NMD2.92mm Male VNA High Performance Phase Stable Cable
    Code: TMWNMD2.4mmmale-3
    40 GHz NMD 2.4mm Female - NMD2.92mm Male VNA High Performance Phase Stable Cable
    £0.00

    Connector material and surface treatment
    Housing: Passivation of stainless steel
    Central Conductor: Heat treatment gold plating of beryllium bronze

    Cable material and structural characteristics
    Central conductor: Silver plating on copper
    Insulator:   
    Outer conductor: Silver plated copper tape wrapping
    Outer shield: Copper wire silver plated braid
    Outer sheath: Multilayer shielding sheath
    Minimum bending radius: 50mm

    Environmental adaptability
    Continuous service temperature: 0℃~+40℃
    Storage temperature: -40℃~+75℃

    Typical parameters
    Instrument port: NMD2.4mm male
    Cable port 1: NMD2.4mm female
    Cable port 2: NMD2.92mm male
    Frequency (GHz): 40
    Standing wave (Max): 1.30:1
    Insertion loss: <2.8dB
    Amplitude stability: <±0.05dB
    Phase stability: <±3.0°


    50 GHz NMD 2.4mm Female - 2.4mm Female VNA High Performance Phase Stable Cable
    Code: TMWNMD2.4mmmale-2
    50 GHz NMD 2.4mm Female - 2.4mm Female VNA High Performance Phase Stable Cable
    £0.00

    Connector material and surface treatment
    Housing: Passivation of stainless steel
    Central Conductor: Heat treatment gold plating of beryllium bronze

    Cable material and structural characteristics
    Central conductor: Silver plating on copper
    Insulator:   
    Outer conductor: Silver plated copper tape wrapping
    Outer shield: Copper wire silver plated braid
    Outer sheath: Multilayer shielding sheath
    Minimum bending radius: 50mm

    Environmental adaptability
    Continuous service temperature: 0℃~+40℃
    Storage temperature: -40℃~+75℃

    Typical parameters
    Instrument port: NMD2.4mm male
    Cable port 1: NMD2.4mm female
    Cable port 2: NMD2.4mm male
    Frequency (GHz): 50
    Standing wave (Max): 1.35:1
    Insertion loss: <3.2dB
    Amplitude stability: <±0.05dB
    Phase stability: <±3.5°


    50 GHz NMD 2.4mm Female - NMD2.4mm Male VNA High Performance Phase Stable Cable
    Code: TMWNMD2.4mmmale-1
    50 GHz NMD 2.4mm Female - NMD2.4mm Male VNA High Performance Phase Stable Cable
    £0.00

    Connector material and surface treatment
    Housing: Passivation of stainless steel
    Central Conductor: Heat treatment gold plating of beryllium bronze

    Cable material and structural characteristics
    Central conductor: Silver plating on copper
    Insulator:   
    Outer conductor: Silver plated copper tape wrapping
    Outer shield: Copper wire silver plated braid
    Outer sheath: Multilayer shielding sheath
    Minimum bending radius: 50mm

    Environmental adaptability
    Continuous service temperature: 0℃~+40℃
    Storage temperature: -40℃~+75℃

    Typical parameters
    Instrument port: NMD2.4mm male
    Cable port 1: NMD2.4mm female
    Cable port 2: NMD2.4mm male
    Frequency (GHz): 50
    Standing wave (Max): 1.35:1
    Insertion loss: <3.2dB
    Amplitude stability: <±0.05dB
    Phase stability: <±3.5°


    40 GHz NMD 2.92mm Female - 2.4mm Female VNA High Performance Phase Stable Cable
    Code: TMWMD2.92mmmale-4
    40 GHz NMD 2.92mm Female - 2.4mm Female VNA High Performance Phase Stable Cable
    £0.00

    Connector material and surface treatment
    Housing: Passivation of stainless steel
    Central Conductor: Heat treatment gold plating of beryllium bronze

    Cable material and structural characteristics
    Central conductor: Silver plating on copper
    Insulator:   
    Outer conductor: Silver plated copper tape wrapping
    Outer shield: Copper wire silver plated braid
    Outer sheath: Multilayer shielding sheath
    Minimum bending radius: 50mm

    Environmental adaptability
    Continuous service temperature: 0℃~+40℃
    Storage temperature: -40℃~+75℃

    Typical parameters
    Instrument port: NMD2.92mm male
    Cable port 1: NMD2.92mm female
    Cable port 2: 2.4mm female
    Frequency (GHz): 40
    Standing wave (Max): 1.30:1
    Insertion loss: <2.8dB
    Amplitude stability: <±0.05dB
    Phase stability: <±3.0°


    40 GHz NMD 2.92mm Female - NMD2.4mm Male VNA High Performance Phase Stable Cable
    Code: TMWMD2.92mmmale-3
    40 GHz NMD 2.92mm Female - NMD2.4mm Male VNA High Performance Phase Stable Cable
    £0.00

    Connector material and surface treatment
    Housing: Passivation of stainless steel
    Central Conductor: Heat treatment gold plating of beryllium bronze

    Cable material and structural characteristics
    Central conductor: Silver plating on copper
    Insulator:   
    Outer conductor: Silver plated copper tape wrapping
    Outer shield: Copper wire silver plated braid
    Outer sheath: Multilayer shielding sheath
    Minimum bending radius: 50mm

    Environmental adaptability
    Continuous service temperature: 0℃~+40℃
    Storage temperature: -40℃~+75℃

    Typical parameters
    Instrument port: NMD2.92mm male
    Cable port 1: NMD2.92mm female
    Cable port 2: NMD2.4mm male
    Frequency (GHz): 40
    Standing wave (Max): 1.30:1
    Insertion loss: <2.8dB
    Amplitude stability: <±0.05dB
    Phase stability: <±3.0°


    40 GHz NMD 2.92mm Female - 2.92mm Female VNA High Performance Phase Stable Cable
    Code: TMWMD2.92mmmale-2
    40 GHz NMD 2.92mm Female - 2.92mm Female VNA High Performance Phase Stable Cable
    £0.00

    Connector material and surface treatment
    Housing: Passivation of stainless steel
    Central Conductor: Heat treatment gold plating of beryllium bronze

    Cable material and structural characteristics
    Central conductor: Silver plating on copper
    Insulator:   
    Outer conductor: Silver plated copper tape wrapping
    Outer shield: Copper wire silver plated braid
    Outer sheath: Multilayer shielding sheath
    Minimum bending radius: 50mm

    Environmental adaptability
    Continuous service temperature: 0℃~+40℃
    Storage temperature: -40℃~+75℃

    Typical parameters
    Instrument port: NMD2.92mm male
    Cable port 1: NMD2.92mm female
    Cable port 2: 2.92mm female
    Frequency (GHz): 40
    Standing wave (Max): 1.30:1
    Insertion loss: <2.8dB
    Amplitude stability: <±0.05dB
    Phase stability: <±3.0°


    40 GHz NMD 2.92mm Female - NMD2.92mm Male VNA High Performance Phase Stable Cable
    Code: TMWNMD2.92mmmale-1
    40 GHz NMD 2.92mm Female - NMD2.92mm Male VNA High Performance Phase Stable Cable
    £0.00

    Connector material and surface treatment
    Housing: Passivation of stainless steel
    Central Conductor: Heat treatment gold plating of beryllium bronze

    Cable material and structural characteristics
    Central conductor: Silver plating on copper
    Insulator:   
    Outer conductor: Silver plated copper tape wrapping
    Outer shield: Copper wire silver plated braid
    Outer sheath: Multilayer shielding sheath
    Minimum bending radius: 50mm

    Environmental adaptability
    Continuous service temperature: 0℃~+40℃
    Storage temperature: -40℃~+75℃

    Typical parameters
    Instrument port: NMD2.92mm male
    Cable port 1: NMD2.92mm female
    Cable port 2: NMD2.92mm male
    Frequency (GHz): 40
    Standing wave (Max): 1.30:1
    Insertion loss: <2.8dB
    Amplitude stability: <±0.05dB
    Phase stability: <±3.0°


    18 GHz NMD 3.5mm Female - Type N Female VNA High Performance Phase Stable Cable
    Code: TMWNMD3.5mmmale-4
    18 GHz NMD 3.5mm Female - Type N Female VNA High Performance Phase Stable Cable
    £0.00

    Connector material and surface treatment
    Housing: Passivation of stainless steel
    Central Conductor: Heat treatment gold plating of beryllium bronze

    Cable material and structural characteristics
    Central conductor: Silver plating on copper
    Insulator:   
    Outer conductor: Silver plated copper tape wrapping
    Outer shield: Copper wire silver plated braid
    Outer sheath: Multilayer shielding sheath
    Minimum bending radius: 50mm

    Environmental adaptability
    Continuous service temperature: 0℃~+40℃
    Storage temperature: -40℃~+75℃

    Typical parameters
    Instrument port: NMD3.5mm male
    Cable port 1: NMD3.5mm female
    Cable port 2: Type N female
    Frequency (GHz): 18
    Standing wave (Max): 1.20:1
    Insertion loss: <1.5dB
    Amplitude stability: <±0.05dB 
    Phase stability: <±2.0°


    18 GHz NMD 3.5mm Female - Type N Male VNA High Performance Phase Stable Cable
    Code: TMWNMD3.5mmmale-3
    18 GHz NMD 3.5mm Female - Type N Male VNA High Performance Phase Stable Cable
    £0.00

    Connector material and surface treatment
    Housing: Passivation of stainless steel
    Central Conductor: Heat treatment gold plating of beryllium bronze

    Cable material and structural characteristics
    Central conductor: Silver plating on copper
    Insulator:   
    Outer conductor: Silver plated copper tape wrapping
    Outer shield: Copper wire silver plated braid
    Outer sheath: Multilayer shielding sheath
    Minimum bending radius: 50mm

    Environmental adaptability
    Continuous service temperature: 0℃~+40℃
    Storage temperature: -40℃~+75℃

    Typical parameters
    Instrument port: NMD3.5mm male
    Cable port 1: NMD3.5mm female
    Cable port 2: Type N male
    Frequency (GHz): 18
    Standing wave (Max): 1.20:1
    Insertion loss: <1.5dB
    Amplitude stability: <±0.05dB 
    Phase stability: <±2.0°


    26.5 GHz NMD 3.5mm Female - 3.5mm Female VNA High Performance Phase Stable Cable
    Code: TMWNMD3.5mmmale-2
    26.5 GHz NMD 3.5mm Female - 3.5mm Female VNA High Performance Phase Stable Cable
    £0.00

    Connector material and surface treatment
    Housing: Passivation of stainless steel
    Central Conductor: Heat treatment gold plating of beryllium bronze

    Cable material and structural characteristics
    Central conductor: Silver plating on copper
    Insulator:   
    Outer conductor: Silver plated copper tape wrapping
    Outer shield: Copper wire silver plated braid
    Outer sheath: Multilayer shielding sheath
    Minimum bending radius: 50mm

    Environmental adaptability
    Continuous service temperature: 0℃~+40℃
    Storage temperature: -40℃~+75℃

    Typical parameters
    Instrument port: NMD3.5mm male
    Cable port 1: NMD3.5mm female
    Cable port 2: 3.5mm female
    Frequency (GHz): 26.5
    Standing wave (Max): 1.25:1
    Insertion loss: <1.8dB
    Amplitude stability: <±0.05dB 
    Phase stability: <±2.5°


    26.5 GHz NMD 3.5mm Female - NMD3.5mm Male VNA High Performance Phase Stable Cable
    Code: TMWNMD3.5mmmale-1
    26.5 GHz NMD 3.5mm Female - NMD3.5mm Male VNA High Performance Phase Stable Cable
    £0.00

    Connector material and surface treatment
    Housing: Passivation of stainless steel
    Central Conductor: Heat treatment gold plating of beryllium bronze

    Cable material and structural characteristics
    Central conductor: Silver plating on copper
    Insulator:   
    Outer conductor: Silver plated copper tape wrapping
    Outer shield: Copper wire silver plated braid
    Outer sheath: Multilayer shielding sheath
    Minimum bending radius: 50mm

    Environmental adaptability
    Continuous service temperature: 0℃~+40℃
    Storage temperature: -40℃~+75℃

    Typical parameters
    Instrument port: NMD3.5mm male
    Cable port 1: NMD3.5mm female
    Cable port 2: NMD3.5mm female
    Frequency (GHz): 26.5
    Standing wave (Max): 1.25:1
    Insertion loss: <1.8dB
    Amplitude stability: <±0.05dB 
    Phase stability: <±2.5°


    18 GHz Type N Male - NMD 3.5mm Male VNA High Performance Phase Stable Cable
    Code: TMWTypeNfemale-3
    18 GHz Type N Male - NMD 3.5mm Male VNA High Performance Phase Stable Cable
    £0.00

    Connector material and surface treatment
    Housing: Passivation of stainless steel
    Central Conductor: Heat treatment gold plating of beryllium bronze

    Cable material and structural characteristics
    Central conductor: Silver plating on copper
    Insulator:   
    Outer conductor: Silver plated copper tape wrapping
    Outer shield: Copper wire silver plated braid
    Outer sheath: Multilayer shielding sheath
    Minimum bending radius: 50mm

    Environmental adaptability
    Continuous service temperature: 0℃~+40℃
    Storage temperature: -40℃~+75℃

    Typical parameters
    Instrument port: Type N female
    Cable port 1: Type N male
    Cable port 2: NMD3.5mm male
    Frequency (GHz): 18
    Standing wave (Max): 1.20:1
    Insertion loss: <1.5dB
    Amplitude stability: <±0.05dB 
    Phase stability: <±2.0°


    18 GHz Type N Male - Type N Female VNA High Performance Phase Stable Cable
    Code: TMWTypeNfemale-2
    18 GHz Type N Male - Type N Female VNA High Performance Phase Stable Cable
    £0.00

    Connector material and surface treatment
    Housing: Passivation of stainless steel
    Central Conductor: Heat treatment gold plating of beryllium bronze

    Cable material and structural characteristics
    Central conductor: Silver plating on copper
    Insulator:   
    Outer conductor: Silver plated copper tape wrapping
    Outer shield: Copper wire silver plated braid
    Outer sheath: Multilayer shielding sheath
    Minimum bending radius: 50mm

    Environmental adaptability
    Continuous service temperature: 0℃~+40℃
    Storage temperature: -40℃~+75℃

    Typical parameters
    Instrument port: Type N female
    Cable port 1: Type N male
    Cable port 2: Type N female
    Frequency (GHz): 18
    Standing wave (Max): 1.20:1
    Insertion loss: <1.5dB
    Amplitude stability: <±0.05dB 
    Phase stability: <±2.0°


    18 GHz Type N Male - Type N Male VNA High Performance Phase Stable Cable
    Code: TMWTypeNfemale-1
    18 GHz Type N Male - Type N Male VNA High Performance Phase Stable Cable
    £0.00

    Connector material and surface treatment
    Housing: Passivation of stainless steel
    Central Conductor: Heat treatment gold plating of beryllium bronze

    Cable material and structural characteristics
    Central conductor: Silver plating on copper
    Insulator:   
    Outer conductor: Silver plated copper tape wrapping
    Outer shield: Copper wire silver plated braid
    Outer sheath: Multilayer shielding sheath
    Minimum bending radius: 50mm

    Environmental adaptability
    Continuous service temperature: 0℃~+40℃
    Storage temperature: -40℃~+75℃

    Typical parameters
    Instrument port: Type N female
    Cable port 1: Type N male
    Cable port 2: Type N male
    Frequency (GHz): 18
    Standing wave (Max): 1.20:1
    Insertion loss: <1.5dB
    Amplitude stability: <±0.05dB 
    Phase stability: <±2.0°


    MCS Components
    Address:
    MCS Test Equipment,
    Glascoed Road,
    New Vision Business Park,
    St Asaph, Denbighshire.
    LL17 0LP
    Mon - Fri: 09:00 - 17:00 Phone: +44 (0)1492 643 060
    Email: sales@mcs-components.com
    Follow us on:
    Subscribe to our newsletter

    You will receive all the latest test & measurement news and components special offers.

    WE ACCEPT:

    © 2023 MCS Components by MCS Test Equipment. Registered Company Number: 04147703. All Rights Reserved

    Product successfully added to your Shopping Cart

    Continue Shopping
    Proceed to Checkout

      Sample Product

      • Twitter
      • Facebook
      • Google+